[AMPS] Heavy Iron%3

Peter Chadwick Peter_Chadwick@mitel.com
Thu, 23 Mar 2000 07:52:51 -0000


Bob says:

>IMD increases because there is no such thing as 2 perfectly matched tubes.
>Uneven load sharing no matter how small will increase IMD. 

If you stick in any 4 tubes selected at random from tubes with the spread of
sweep tubes or even 6146Bs, you will have trouble, but with reasonable
design and matching, I can't say that I agree. Collins and Redifon were
amongst those companies that produced PA's with 3 and 4 tubes in while
meeting exacting professional IMD specs. Unless the mismatch is large, the
IMD will not suffer in a measurable amount.

Matching by adjusting the individual screen voltages is a well known
technique. BTW, what about distributed amplifiers - they use paralleled
tubes in great numbers and achieve good linearity.

73

Peter G3RZP



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm