[AMPS] SB-220 Conversion Confusion: Inductance

George T. Daughters gdaught6@leland.Stanford.EDU
Mon, 15 May 2000 13:54:48 -0700




Hi all,

> >> Two tubes requires that L be cut in half and C-tune be doubled to
> >> maintain the same Q.   Guessing at tank values is not good engineering
> >> practice.  

Right.  And reducing the number of turns from 3 to 1.5 doesn't 
reduce the L by 50%.  In general, halving the number of turns in a 
coil reduces the inductance by a factor of four.  L is proportional to 
N-squared.

73,
 
George T. Daughters, K6GT

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm