[AMPS] FS: Assorted parts that may be of some use in amplifiers

Radio WC6W wc6w@juno.com
Sat, 11 Nov 2000 13:43:32 EST


****************  Test Equipment  ***************************

Bird Model 43 Wattmeter, w/UHF connectors, paint somewhat beat; 
feet & handle o.k, and most importantly it's working fine.   $100

 Element for Bird:  50W, 100-250 MHz  $40

General Radio 758-A  55-400 MHz Wavemeter.  Dial in need of severe
polishing
 but, insides are clean.   $30

Hewlett Packard 141T Spectrum Analyzer system including mainframe, 8552B
IF section,
 8553B, and  8555A  RF sections plus 8443A Tracking generator.  With
manuals (or
copies thereof...) for all units.  $2200 

Pomona #2399 cast Aluminum Boxes (2¼" x 1-1/8" x 7/8" o.d.) w/ gold
plated SMA 
female connector on each end.   New (in factory sealed plastic bag) --
$15 ea

Tektronix P6019 current probe only, $40   (similar to a P6021)

************************ Panel Meters  *******************************

Analog Devices  AD2004 4½ Digit LED 2 (1.9999) volt Panel Meter; NOS w/
data sheet $50

FLW Model 204B2, ER2  & model 204B-2D1,ER2,01 digital panel meters
w/internal 120VAC power supply. 
 4 digit display plus a minus sign; 3½ or full 4 digits ?? Full scale
unknown--  $30 pair

GE 50-283013MTMT1 3" thin edgewise panel meter 10V scale NOS in box --
$20

GE DO-41 3" round meters $10 each
   
   600 MA  750MA

GE DW-44 2" round 8A RF Ammeters w/ internal thermocouple  $15 ea

Simpson 45  3" round VU meter $20

Westinghouse 3½" Square RX-35 series meters  $10 each

   15 VDC   20 VAC   15 MA   25 MA   50 MA   100 MA
   &  500 MA scale (10 MA actual movement on this last one)

Weston 301 3" round meters $10 ea

   10 VDC  2 MA  5 MA  15 MA  150 MA  300 MA  500 VDC
   3A RF (requires external thermocouple)

       1301 3"  2A

Weston 425, 100 mA  3" round RF ammeter w/ internal thermocouple $15 
    

****************** POWER TUBES *********************

450TH Eimac -- These are the pulls and spares from what was a working
 power amp. in the estate.  $100 ea

7580W/4CX250R (Amperex / Eimac) pulls $25 ea --or-- 5 for $100

8245/4CX250K pulls $30 ea

7034/4X150A pulls $10 ea --or-- 5 for $40

4X150G pulls $10 ea

--------- Planar Tubes-----------
2C39A pulls $10 ea (one left)
7698 pulls $10 ea
7843 pulls $10ea
Y602B pull $5 
Y2177 pulls $5 ea
EE144 pull $5

-------- Lighthouse tubes -------
2C40A pulls $10 ea
2C46 pull  $10 
446A pulls $10 ea

--------- and the rest -----------

5763 pulls/NOS $5 ea
4637 (RCA) pull $40
6481 new $50 
	
****************** SOCKETS **********************

 Eimac SK-1500A mounted to a 17" square aluminum panel.  Includes a
current transformer to monitor filament current.  $300

 Johnson 211 / Birnbach 434 "50 watt" sockets fit 450TL/TH etc.  $25 ea

"Ring" style 4 pin sockets with a small metal post similar to
 Johnson 122-234, fit 5D21, 705A, 715A/B (per the Johnson catalog) used
$5 ea

 Johnson 122-101 7 pin socket New (terminals tarnished from age) (for
826, 832 etc.) $15

 Johnson 248 / RCA  UT-106 & Other 7 Pin Septar (for 8877, 829, etc) used
$10ea

 Eimac SK 510 socket, "Overused": One screen contact missing - lower air
channel milled off  for 4-1000A / 3-1000Z  fine for a lamp!  $10
 
4CX250 family sockets --
 Johnson 124-115-2 new (tarnished from age) $25 ea, used $15 ea
 Eimac SK 610 (cathode grounded)  used $15 ea
 Eimac SK 606 Chimneys  like new! :-)  $10 ea.

 Eimac HR-6 Plate Caps (for 3-500Z, 4-400A, etc.)  One NOS in Eimac bag,
one used -- $10 both.

 Eimac HR-8 Plate Caps (for 3-1000Z, 4-1000A, 450TL/TH, etc.) used -- $15
pair


***********  4CX5000 (or similar) Screen Supply parts ************

 Triad P-217AL transformer -- 2880 VCT 250 mA DC w/ 115/230 primary
	
 Triad C-19A choke -- 10H 300 mA, 105 ohms DCR, 3KV insulation

 Plasticon 4 uF 2000V capacitor w/ mounting brackets.  (5" x 3.5" x
1.25")

 These are all used but, nice & clean mid '80's vintage components.  $50
all


************* VACUUM VARIABLES ********************

Jennings Vacuum Variables -- all used (or at least aged) 

UCS-300-15S	300pF	15KV	$250  with puller, later
manufacture (blue)    
UCSL-750	750pF	3KV	$150  with puller  
UCSL-1000	1000pF  3KV     $150  with puller

R1G  SPST 20KV 20Amp Vacuum Switch  $100

---------Fixed vacuum caps----------

Jennings VC-12	12pF	20KV	$25
Jennings                50pF	86KV	$86
Western Elec	100pF	5KV	$50  (This one hi-pot checked
@ 14KV)


************ Hi-Power Pi-Coil + Bandswitch assembly **************

The Pi coil is wound in 3 co-linear sections:

   24 T #8 copper wire  6" long on a 3½" diameter ceramic form -- my
calulations show 22uH

   6T ¼" Copper tubing  2" long 3" diameter -- another 2.5 uH

   & 6T ¼ Copper tubing 2½" diameter by 2½" long -- 1.8 uH

   Including the end stuff this assembly is about 14" long overall so, it
isn't for a small amp.

   The copper is tarnished, but not too bad -- a quick dip in Tarn-X or
vinegar should clean it up.

  The bandswitch is 6 postion -- very heavy duty.  The contacts are 3/8"
diameter (and about the same hi!) and the rotor contact is a pair of 3/8"
wide strips.  It has a nice roller detent on the rotor.  This was
obviously originally some commercial switch but, the components have been
remounted to a large (6" x 8") sheet of plexiglass.   Four of the 6 taps
are currently connected to the coils with 1/4 wide strap.   

  Finally, there are three large 6" ceramic and glass standoffs that
support the coil assembly.  $50

********************** Fixed Coils *******************************

55 uH silver plated edge wound .200 x .05 buss wire.   5" diameter by 10"
long overall  $30

20uH plated #14 wire on 2½" ceramic form; aged but unused  $5 ea. 

Filament choke for GG amp.  Bifilar wound #10 wire on ½" dia. by 7½" long
ferrite form.  Used, good condx -- $15


**************  MISCELLANEOUS *****************

Square D, size 2, two pole, contactor rated at 50 amps (600 V max).  The
coil is 120VAC -- $20 used

Johnson 154-506 Dual 153pF 3KV air variable used, good  $20ea (2
available)

Hammarlund NZ-10 Neutralizing capacitors, shiny NOS,  $25 pair

Ohmite 75K 175W resistors w/ mtng. brackets, used.  $5 ea

Westinghouse 6-1-1B/1N1188 3 Phase 600V 35 Amp rectifier assembly 
with heatsink.  Unused but, tarnished from long storage  $10.

Collins 672-2110-00,  7.5VCT 24A Filament Xfrmr  210/220/230/240/250
Primary (no 110!) -- One
 of the 7.5V terminals is broken off but, the wire is accessable in the
potting.
FREE!!! (plus shipping) w/$25 purchase from this list.  

****************************************************************************************

All of the above plus shipping, if necessary, naturally.

Contact:  Marv  WC6W   310 649 3111 (reasonable hours Pacific Time
please) 
or via return e-mail



















*

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com