[AMPS] Re: Hi Power Connectors

[Jan.E.Holm@telia.se]

     Well, I never had an N to fail yet, except if water gets
     in it will fry at once, but then again almost anything will
     fry when water gets in.
     However,  nowdays I started to use 7/16 connectors on
     HF and VHF/UHF also for that matter. One sure will sleep
     safely with 7/16 connectors in the system.
      
     73, Jim SM2EKM
------------------------------------

-----Ursprungligt meddelande-----
Från:	i4jmy@iol.it [SMTP:i4jmy@iol.it]
Skickat:	 den 20 november 2000 22:38
Till:	k6uj@pacbell.net; amps@contesting.com
Ämne:	Re: [AMPS] Hi Power Connectors


It depends by frequency and duty cycle.
Professionally, PL259 is not considered at all, while N is not 
considered as
an Hi power connector.

73,
Mauri I4JMY

----- Original Message -----
From: "k6uj" <k6uj@pacbell.net>
To: <amps@contesting.com>
Sent: Monday, November 20, 2000 6:14 PM
Subject: [AMPS] Hi Power Connectors


>
> Hi All,
>
> I have been searching the archives to find something on the actual
> voltage/power rating
> of Pl-259's and type N connectors.  Anyone know where actual
specifications
> might be found ?
>
>
> 73,
>
> Bob,  K6UJ
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

 <<Fil: Re_ [AMPS] Hi Power Connectors.TXT>> 


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com