[AMPS] Thanks & PC Board

[Bruce R. Knox]

Jeff:

Go to http://www.expresspcb.com and look around - you get a free double 
sided layout package for Windows and you order boards, very reasonably 
priced, over the Internet.  Delivery is measured in days and the quality is 
excellent.

The software takes an hour to learn and it's a heck of a lot better than 
transfer/photographic methods!  Plus, no gerber files are needed.

I use this all the time.

73

Bruce  W8GN
RF Applications, Inc.


-----Original Message-----
From:	Jeff Weinberg  W8CQ [SMTP:w8cqjeff@tds.net]
Sent:	Sunday, November 26, 2000 22:56
To:	AMPS
Subject:	[AMPS] Thanks & PC Board


Hi All,
Me again!!  Thanks for the replies on the twist-lock caps.  I have decided
to just re-make the PC board for using computer grade caps.

I have the layout on a piece of acetate, but am not very good at
transferring that to copper and etching.

Does anyone out there know how to do this and would you be willing to do a
one-of-a-kind board.  I will gladly pay costs, etc.  The layout I have on
acetate is a positive image of the traces/pads to be left on the board 
after
etching.  It is a one-sided, simple power supply board for a Clipperton L,
approximate size 5.25 x 7.1875 inches.

Any help out there?

Regard,
Jeff  W8CQ


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com