[AMPS] Tetrode PA

[Peter Chadwick]

Ken says;

>What is the best way to adjust the indevidual anode current in an 
>amplifier with 2 tetrodes?

Pappenfus suggests using the maximum screen volts and  adjusting bias for rated
zero signal plate current for the tube with lowest plate current. Then adjust
screen volts on the other tube(s) for rated ZSAC.

73

Peter G3RZP




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com