[AMPS] protection

[Mike Sawyer]

Peter,
    They do make switches that go down to .1 inch. However, they are very
large and cumbersome. The ones we use are made by Cleveland Controls. We use
them to maintain differential pressure across our multi-hearth incinerator,
(keep it from developing positive pressure). The most important aspect is
that they around $500 a piece!
Gud luck,
Mike(y)
W3SLK
----- Original Message -----
From: Peter Chadwick <Peter_Chadwick@mitel.com>
To: <amps@contesting.com>; Conrad Farlow <conrad.farlow@virgin.net>;
<W8JI@contesting.com>
Sent: Tuesday, October 17, 2000 8:31 AM
Subject: [AMPS] protection


>
> Tom says:
>
> >That can be as simple as a below chassis/above chassis pressure
differential
> >switch.
>
> Tom, is there a source of cheap differential switches that will operate
down to,
> say, 0.1 inch WG?
>
> 73
>
> Peter G3RZP
>
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com