[AMPS] G2DAF Circuit
Ian White, G3SEK
Ian White, G3SEK" <g3sek@ifwtech.com
Thu, 26 Oct 2000 20:10:25 +0100
Tom Rauch wrote:
>
>The saving grace of the DAF circuit is the heavy negative RF
>feedback (from cathode drive) helps correct for the "half-fast"
>manner the circuit developes screen voltage.
>
The real G2DAF circuit is not cathode driven - it's grounded cathode,
passive grid. (Was the "G2DAF" design that you built and tested?)
The one-and-only *real* G2DAF design is the one in his original
articles, reproduced on my web site.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.com/g3sek
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com