[AMPS] heating tubes....
Ian White, G3SEK
Ian White, G3SEK" <g3sek@ifwtech.com
Wed, 6 Sep 2000 20:06:34 +0100
measures wrote:
>€ I have tested many metal anode-cooler 3-500Z tubes that g/fil. shorted
>after a big-bang. The majority had under 3uA of grid/anode leakage at
>8000v. The subsequent autopsies revealed no arc marks on the grid.
The reasons for observing low gas currents if you delay more than a few
seconds after the event have been explained many times - "it's the
gettering action".
Does testing 3-500Zs cause amnesia?
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.com/g3sek
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com