FW: [AMPS] 3-500z repair question

[Phil Levin W2GE]

> 5. tin with 6% AG / 94% Sn silver solder and resolder.  Add solder as
> needed.
> 6.  remove solder flux residue with everclear or denatured ethanol.


> --  note - do not mix tin/lead solder with silver solder.
> cheers, Bill
>
> -  Rich..., 805.386.3734, www.vcnet.com/measures.
> end


I've never heard this Rich, why not??? (the mixing of tin/lead and silver
solder) Unfortunately I know I've done this many times in the past....

Phil W2GE




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com