[AMPS] ?: Cooling

Spencer Petri wa5jci@flash.net
Mon, 9 Apr 2001 13:59:58 -0500





Greetings,

You'd need a small fan blowing onto the bottom sode of the socket to keep
the seals cool enough.

es 73 de Pete WA5JCI

6 Mtr VUCC#361/673--2 Mtr VUCC#346/190
6 Mtr WAS#490--6 Mtr DXCC/92 Confirmed
Charter Life Member CSVHFS


----------
> From: Radio WC6W <wc6w@juno.com>
> To: amps@contesting.com
> Subject: [AMPS] ?: Cooling
> Date: Saturday, April 07, 2001 1:24 PM
> 
> 
> A friend asked me this the other day... and, since I don't know, I
> thought I'd ask the list.
> 
>   If a 4CX250 (or similar) tube is mounted with the screen ring directly
> grounded by means of a flange (or perhaps finger stock) in a cavity, and
> with the anode cooler provided the recommended air supply, then is any
> additional cooling required on the base side, to keep the seal 
> temperatures within specs? 
> 
>   Or would conduction cooling from the screen ring to the chassis be
> sufficient?
> 
> 73,
>   Marv  WC6W
> 
> 
> 
> 
> 
> 
> 
> *  
> 
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com