[AMPS] Alpha 374A

[2]

>
>
>
>
>
>
>
>
>> //  Taking care means don't exceed 350mA of I-anode per bottle in AŘ 
>> mode.  
>	[Steve Katz]  What about A3j?  Peak Ip can seemingly exceed this.

The A3J rating is 500mA.  In other words, tune it up with a pulser or CW 
keyer.  

>Is there a time constant for the kind of damage you describe?  We have one
>old 3-hole 374 which hits >1Apk Ip all the time and has used the same tubes
>for at least 20 years, but tuneup Ip is always run lower (by drive
>reduction).
>	WB2WIK/6
>>   
>> 
>> -  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
>> end
>> 
>> 
>> --
>> FAQ on WWW:               http://www.contesting.com/FAQ/amps
>> Submissions:              amps@contesting.com
>> Administrative requests:  amps-REQUEST@contesting.com
>> Problems:                 owner-amps@contesting.com
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>
>


-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com