[AMPS] Output Pulse from ICOM 706

[Tom Rauch]

> It would seem to me that the IC-706 (and rigs like it) would mainly be
> problematic with amps that require substantially less than 100w to drive
> and that switch quickly. Is this correct? 73, Doug, K4DSP

That's a lot less than I measure here Doug, using a peak storage 
power meter used for reading medical devices.

With 13.8 volts I read an overshoot to 140 watts on my newer 706 
MKII and 148 watts on the old non-Mark one.


73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com