[AMPS] AL-1500, AL-82, AL-1200, QRO???
measures
2@vc.net
Sat, 20 Jan 2001 05:25:40 -0800
>
>Rich Measures wrote:
>>
>>>>>
>>>>One does not have to remember anything if one puts the glitch R in the
>>>>positive HV lead.
>>>>
>>>Except to insulate *both* ends to full HV.
>>
>>Ian plays the Wild Card.
>>
>
>>>>>those
>>>>>components are not protected any differently by a glitch resistor in the
>>>>>B+ or the B-minus. As Andy said, it's the same surge current flowing
>>>>>around the loop, ...
>>>>
>>>> It can not be the same current if the Glitch R drop is limited to 1.5v
>>>>by the glitch diode.
>>>
>>>You're imagining the diode in the wrong place, shunting the glitch
>>>resistor.
>>>
>>
>>
>>
>>see diagram
>
>There wasn't one... but there is now. I just wasted an hour hacking some
>diagrams and text together, ...
True. You need to be looking at a commercial amplifier that puts the
glitch R in the negative circuit. The 2k-4 is an example.
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com