[AMPS] Voltage Doublers

[Steve Thompson]

>What does the voltage regulation look like, from 'zero' current (bleeder
>resistors only) to say 100mA ZSAC and then to 300mA peak?
Update - I'd left the caps at 2x100u in the simulation, which gave a
reaonable 60V ripple. Changing to 2x40u as proposed by Glenn gives the same
mean voltage but yields a lot of ripple, 115Vish. Using 4x190u each half
(still plenty of margin on volts) reduces it to 95V, still a bit high?

Steve


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com