[AMPS] Voltage Doublers

[Steve Thompson]

snip
>So it looks like you're in business with that transformer after all,
>Glenn. Sorry if my pessimistic analysis gave you a bad 24 hours!
>
>
>Even so, that doesn't change the fact that FWD is *much* more sensitive
>to Rs than FWB is.
>
>73 from Ian G3SEK

Even if you find that the regulation and ripple are acceptable, don't forget
to calculate the transformer dissipation as a sanity check. Then short the
secondary with an ammeter and run it up on a variac to the rms current
predicted by simulation and check the temperature after a few hours.

Steve


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com