[AMPS] Dirty Output

[Firson Maryutenli]

>The problem is, I was feeding relative clean signal in grid of 6L6
>(the nearest harmonic in 3.930 Khz minus 70 db below desired signal >3.800 
>khz). But the output result in 6L6 there is sporious generated >in 3.825 
>Khz, 3,850 Khz, 3.875 with peak only minus 20 db under >desired signal in 
>3.800 Khz.
--------------------------------
The problem solved, when I changing 1mh RF Choke with 4K7 Carbon resistor on 
this 6L6 Grid, thanks for all response that I have received from this 
reflector.

de YD1BIH
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com