[AMPS] Problem with AL-811H

[Phil Clements]

> The first place I would look is the coax,cable from the ant. relay to the
> output connector. I fought an amp , (not an al811) sometime back for quite
> some time before I decided to look in that area. It isn't the only place ,
> maybe but it is one of many, and it's just not too obvious either!!!!!
> disconnect the rf choke on the output side and measure from the output
> connector to ground.have fun!!!!
>    carl / kz5ca

Sage advice, Carl. I have seen that several times.
Also, he can check to make sure the path from the
blocking caps to the antenna connector is not open.
Of course, the antenna relay will have to be energized
to do this test.

(((73)))
Phil, K5PC




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com