[AMPS] SB-1000 mods?
Ian White, G3SEK
Ian White, G3SEK" <g3sek@ifwtech.com
Wed, 12 Sep 2001 16:27:13 +0100
2 wrote:
>// The purpose of the glitch-R is to protect the electron tube from
>failure during an intermittent oscillation condition.
Make that "...from failure due to a current surge occurring for *any*
reason."
It's best to keep an open mind about the causes, but by all means
protect against the effects.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.com/g3sek
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com