[AMPS] Additional Info Voltage Doubler/Filter Capacitance

[Tom Rauch]

Correction.

I left out the fact I used one ampere of load current in the example 
below:

> > Kurt,
> > There is full info on modelling voltage doublers on the Duncan amps
> > = site. You do not have to download and store, you can simply open
> > the site and = do the exercise
> 
> I didn't seem to be able to do that Barry. I had to download the file.
> 
> I could only run the bridge rectifier program, and it very clearly
> gave me incorrect answers.
> 
> In one example I modelled a full wave rectifier with 20 ohms ESR (the
> maximum it allows) with 2600 volts at the transformer, and it said
> 3600 volts dc output. That is clearly incorrect.  

73, Tom W8JI
W8JI@contesting.com 

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com