[Amps] FL-2100Z

[Peter Frenning, OZ1PIF]

----- Original Message -----
From: "Alek Petkovic" <vk6apk@eon.net.au>
To: <amps@contesting.com>
Sent: Tuesday, April 02, 2002 12:36 PM
Subject: [Amps] FL-2100Z


> G'day All,
>
> Just thought I would relate my Easter weekend experience to you.
>

>
> The repair shop at my beach house is very basic. The soldering iron is a
> 2.5 inch length of  5/16" copper rod flattened, filed and tinned at one
> end. It has a hole drilled through it half way down its length and a piece
> of 1/8" steel fencing wire, filed square and tapered, is poked through it
> and serves as a handle. Looks more like a little hammer than a soldering
> iron. The iron is heated by removing the cast iron cooking plate from the
> gas barbecue, lighting the burner and putting the iron over the flame. The
> rest of the workshop comprises a pair of combination pliers, 2 ft of resin
> core solder, a philips screwdriver, a flat screwdriver a 2" paintbrush and
> a working beer fridge, amply stocked.
>
> You know, there's not much more that a good handyman could ever need. What
> do you think?
>
That really depends on what you mean by amply stocked... What make of brew?
and how many cases?
:-)
G'day mate.
Vy 73 de OZ1PIF, Peter

**********  OZ1PIF **************
email: oz1pif(no-spam-filler)@get2net.dk
http://hjem.get2net.dk/oz1pif
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************