[Amps] FT-1000D Band Data Jack
Ian White, G3SEK
Ian White, G3SEK" <g3sek@ifwtech.co.uk
Sat, 28 Dec 2002 14:56:43 +0000
Mike Wapner wrote:
>Looking for a source for the "special" 8-pin DIN plug with the tab to
>activate the internal connector switch which isolates pin 8 from ground.
There is no "special tab" - the connector has an ordinary metal shell.
If you're desperate, you can poke wires straight into the socket, and
use the empty shell from any metal DIN plug to operate the switch.
--
73 from Ian G3SEK 'In Practice' columnist for RadCom (RSGB)
Editor, 'The VHF/UHF DX Book'
http://www.ifwtech.co.uk/g3sek