[AMPS] Shunt regulated high voltage psu

[Steve Katz]

> //   Sounds good.  How did you protect the screen from loss of anode 
> potential?.
> 
	::That's a simple one: I didn't.  In my case, the tube is the fuse.
However, in 25 years, this problem has never occurred.  The screen, plate,
grid and filament supplies are all on the same chassis, through the same
power cord, using the same circuit breaker, so will all die quickly in the
event of AC failure.  Other than that, it's been pure luck, which I seem to
enjoy plenty of.

	-Steve WB2WIK/6  

> cheers, Steve
> 
> -  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
> www.vcnet.com/measures.  
> end

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com