[Amps] Henry solid state

[Dr. William J. Schmidt, II]

Email Ted:

Ted Shannon
Henry Radio, Inc.
2050 South Bundy Drive #285
Los Angeles, CA 90025
310-820-1234 ext 310
Fax: 310-826-7790
henryradio at earthlink.net
www.henryradio.com

OUT

Sincerely,

Dr. William J. Schmidt, II  K9HZ

"Collector of Edison Wind-up Phonographs... Do you have one for me?"
Email: bill at wjschmidt.com
Alternate Email: wmschmidt at charter.net
WebPage: www.wjschmidt.com



----- Original Message ----- 
From: "Joe Isabella" <n3ji at yahoo.com>
To: "Amps" <amps at contesting.com>
Sent: Wednesday, August 20, 2003 8:09 PM
Subject: Re: [Amps] Henry solid state


> You're most likely overdriving it -- if memory serves, you can't drive it
with the same levels in
> SSB that you can in FM because it's running class C.  Try driving it with
3 to 5W instead and see
> what happens.  I run a 30W in/160W out Mirage and they suggest 10 to 15W
of SSB drive.
>
> Good luck & 73,
> Joe,
> N3JI
>
> --- Gianluigi Portinaro <i1por at plion.it> wrote:
> > Hello to the group,
> > I am looking for specification or electrical diagram of Henry VHF solid
state amplifier model
> > 100AL10.
> > It is a 146 MHz amp rated at 100 W out with 10 W input.
> > I am not sure if it is designed for ssb work, it is ok in fm mode but
the audio is bad on single
> > side band (I am thinking about bias problem)
> > Can someone help ?
> >
> > Tnx in advance, 73
> >
> > Gianluigi, I1POR
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps