[Amps] AL80A question

[R.Measures]

**  The first goal is to get HV with the tube removed.  Before you get 
too far along, the AL-80 needs a glitch resistor in the HV+ circuit 10 
-20 ohms, 10 - 12 watt glass-coated should do the job.  Adding 3A diodes 
across the meter movements is not a bad idea.  
--  You might be interested in:
http://www.somis.org/bandsw.html

>Hi all ...Ihave a dead AL80A... It is wired for 220 and has been sitting
>idle and covered for almost a year now...I plugged it in the other nite and
>fired it up but popped the 2 fuses....opened it up, cleaned it out with some
>lite compressed air....popped them agn....now I have new fuses in but when I
>turn it on I get nothing...no blown fuses... nothing...I checked the
>interlock and that seems to be fine...not sure where to look from
>here.....there is power to the amp....
>Thanks...
>Randy N1KWF
>
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>