[Amps] disk caps needed

[Karl-Arne Markström]

Hello,

the capacitor in the DX-100 you are looking for appears to be the 0.02 uF that is
connected over the secondary of the modulation transformer.

This capacitor is there to provide an amount of high-frequency roll-off for the audio and some 
transient protection for the modulation transformer and does not have to be a ceramic disc type. 

I would suggest a high-voltage polystyrene or mylar capacitor of 0.022 uF or 22 nF as a replacement.

73 and Season's Greetings/

Karl-Arne
SM0AOM

----- Original Message ----- 
From: "Don Knight" <n4dek at triad.rr.com>
To: <amps at contesting.com>
Sent: Thursday, December 25, 2003 5:03 AM
Subject: [Amps] disk caps needed


> Anyone know of a source for some .02pF @ 1.6kv ceramic disk capacitors?? I've checked several places on the web with no luck.
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps