[Amps] Heathkit HL-2200

[Steve Katz]

Hi Vic, same probably goes for the HL-2200.

BTW I see by my logbook we worked on 160m CW the other day...right about the
same time I snagged AH3D.  C ya on top band again. -Steve, WB2WIK/6

"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill

> -----Original Message-----
> From:	Vic Rosenthal [SMTP:vic at rakefet.com]
> Sent:	Thursday, February 06, 2003 10:13 AM
> To:	Amps reflector
> Subject:	Re: [Amps] Heathkit HL-2200
> 
> Steve Katz wrote:
> > 
> > Isn't another difference that the SB220 had a 10m position on the
> bandswitch
> > and the HL2200 didn't?  -WB2WIK/6
> 
> I'm not sure about this amplifier, but in 1979 I built an SB201 (the
> FCCized
> version of the SB200).  It did not come with a 10 meter position marked on
> the
> front panel, and the bandswitch had a stop at the 15 meter position.  In
> return
> for a photocopy of my license and a few bucks (I don't recall how many),
> they
> sent me a 10 meter kit which included a brand new front panel with 10
> meters
> marked on it, some input components, etc..
> 
> Vic K2VCO
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps