[Amps] 160 output problem

[2]

>Sorry about that, last amplifier in this freq range I built had the 
>pi network for 500 ohms at the anode, so I remembered using 20,000 pF 
>or something in that range. Rich is correct that for a 2K-3K plate 
>load, the blocker can be smaller in value. Also the current through 
>your cap is probably lower than the 40 Amps of plate current I was 
>using.
>
>Goodluck Lynn, look for something else. give it time and maybe smoke 
>will eminate from your problem.
>
€€  smoke signals, a reliable radio direction finder.  

Rich, AG6K, 805-386-3734, www.vcnet.com/measures