[Amps] Titan 425: High SWR on 28 MHZ

[rlm]

•  The 10m tuned input of the Titan 425 needs to be reworked to raise 
the Q (from around 0.6 to around 2) if it driven with other than a Ten 
Tec radio.  Another solution is to use a tuner after the radio.

On Monday, October 13, 2003, at 01:01  PM, Marcel Jorba wrote:

> Hi!
>
> I ask for your help again!
>
>  My Titan 425 is showing very high SWR to my FT-1000mp
> so it doesn't drives it most of the time. This only
> happens on 28 MHZ. Time to time the internal tuner
> tunes it and I put aboutt 1KW out, but nothing most of
> the time.
>
>  I tried with an FT-990 to discard a misfunction on
> the FT.1000mp and the high SWR is there also on 10 m.
>
>  Any help?
>
>  Regards
>
>  Marcel
>
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Shopping - with improved product search
> http://shopping.yahoo.com
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Rich Measures, AG6K, 805.386.3734.  www.somis.org/