[Amps] TL922 QSK mod

[rlm]

On Apr 8, 2004, at 10:20 AM, Paul B. Peters, VE7AVV wrote:

> I'm getting ready to do the QSK mod on a TL922 amp.
>
> The amp has already had most of the well documented modifications=20
> (noted
> by AG6K / others) and changes made --- QSK is all that remains to be
> done. I would be interested in hearing from others who have performed
> the QSK mod to this amp with any tips, suggestions or ideas they may
> have discovered in the process.

=F0  A good place for the HS relay(s) mtg bracket is the space where the=20=

original RF relay was (relay saved for step-start).  A good place for=20
the ECBS is near the zener diode (which is removed).  The zener diode =20=

heatsink can be used for mtg Q1 (TIP-33) the cathode bias switch.  The=20=

rest of the ECBS components can be mounted on an adjacent  long, thin=20
strip of perfboard. RF connections to the vacuum relay should be made=20
with an S-shaped link of soft copper foil in order to minimize sound=20
conduction to the chassis.
-  cheers, Paul
>
> 73 de Paul, VE7AVV
> StoneyGround Station
> -|<*><*>||<*><*>||<*><*>||<*><*>||<*><*>||<*><*>||<*><*>||<*><*>|-
> "All email from this address is checked by Norton AntiVirus 2003"
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Rich Measures, AG6K, 805.386.3734.  www.somis.org/