[Amps] Reducing blower CFM and noise
rlm
r at somis.org
Sun Apr 11 11:58:20 EDT 2004
=F0 That will provide plenty of pressure at 1700-rpm, even for the=20
8171's big brother.
cheers
On Apr 11, 2004, at 10:31 AM, kenw2dtc wrote:
>
> The pressure drop as well as the noise drop will be exponential.
> However, if a tube with a large anode cooler is used - such as an 8171
> - a 1700-rpm blower will usually do the job, especially for SSB and
> telegraphy. What is the diameter of the squirrel cage, Ken?
>
> *******Rich, The diameter of the blade is 9.5 inches.
> *******Thanks,
> *******Ken W2DTC
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Apr 10, 2004, at 9:13 PM, kenw2dtc wrote:
>
> Hi,
> I have a Dayton pressure blower that puts out 820 CFM with a 3450 RPM
> 1/3 HP motor. If I substitute a 1725 RPM 1/4 HP motor will the CFM=20=
> drop
> in
> half? Will the roaring sound drop accordingly also? I hope there is=20=
> a
> straight formula rather than working with fan diameter and number of=20=
> blades
> etc?
> 73,
> Ken W2DTC
>
>
>
>
>
Rich Measures, AG6K, 805.386.3734. www.somis.org/
More information about the Amps
mailing list