[Amps] wire ga.

[rlm]

=F0  anything that will stick will do the trick
- provided it does not have a high D-Factor.

cheers, Carl

On Apr 19, 2004, at 5:02 PM, carl seyersdahl wrote:

> What about Q-dope , Rich. is that good to use.???
>    carl / kz5ca
> ----- Original Message -----
> From: "rlm" <r at somis.org>
> To: "carl seyersdahl" <carlseye at tampabay.rr.com>
> Sent: Monday, April 19, 2004 6:38 PM
> Subject: Re: [Amps] wire ga.
>
>
> =95=A3=C0  Neither did I until I wound one, Carl.  When the wire gets =
warm it
> lengthens and becomes slightly loose on the form.  When the choke is
> warm, this looseness allows the rattling sound during voice =
modulation.
>   cheerz
>
> On Apr 19, 2004, at 3:32 PM, carl seyersdahl wrote:
>
>> Rich: I didn't know the choke would do that, but then I've never had=20=

>> to
>> rewind one either. I'll keep that in mind.
>>     thanks , have a good day.!!
>>      carl / kz5ca
>> ----- Original Message -----
>> From: "rlm" <r at somis.org>
>> To: "carl seyersdahl" <carlseye at tampabay.rr.com>
>> Cc: <Amps at contesting.com>
>> Sent: Monday, April 19, 2004 6:00 PM
>> Subject: Re: [Amps] wire ga.
>>
>>
>> =CC=A1  Carl -- Coating the winding with urethane varnish will keep =
the
>> wires from rattling on SSB.
>>
>> On Apr 19, 2004, at 4:23 AM, carl seyersdahl wrote:
>>
>>>  Thanks to all who answered my wire ga. question.!!
>>>    I took off the old wire , compared it to my spools of 24-26-28-30
>>> ga. and
>>> decided that 26 looked like the best replacememt . So , I rewound =
the
>>> choke
>>> with 26 ga.and will see how good it is when I finish the power =
supply
>>> replacement .
>>>    Thanks again to all.!!!
>>>  carl / kz5ca
>>>
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>> Rich Measures, AG6K, 805.386.3734.  www.somis.org/
>>
>>
>>
>>
> Rich Measures, AG6K, 805.386.3734.  www.somis.org/
>
>
>
>
Rich Measures, AG6K, 805.386.3734.  www.somis.org/