[Amps] Airpax Circuit Breaker?

[Jim Smith]

Craig,
What are the breaker specifics, number of poles, voltage rating, and etc? Does this have wire leads, screw terminals, or bus taps? Could this actually be a shunt trip breaker?

Jim Smith,
KQ6UV

----- Original Message ----- 
From: Craig 
To: amps at contesting.com 
Sent: Tuesday, August 10, 2004 12:06 AM
Subject: [Amps] Airpax Circuit Breaker?


Hi Amps

I have a 50 amp Airpax circuit breaker ModelUPL5023186-9. Its a 50 amp
breaker with a 120 volt series coil on one pole. I would like to use this
breaker for a amp project on a 240 volt line. The question is this. Can i
bypass the series coil on one pole, and   will  bypassing  the series coil
allow that pole to operate as a normal breaker?   I have checked the Airpax
web page,  there's very little information there. I am more familiar with
the  European DIN breakers  rather these rare for us Airpax style breakers.

Craig
VK3HE

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps