[Amps] TL-922 and overdriving

[R.Measures]

On Dec 10, 2004, at 3:41 AM, QSKguy at aol.com wrote:

>
> I'm not sure to understand Richard.
> The mic gain pot is always fully counterclockwised in my case, because 
> I
> don't use any microphone.

On SSB, the mic gain affects P-out.  On CW. the carrier-control affects 
P-out.  Transceiver ALC is always active, no matter what mode is being 
used.

> I just meant that because of CW mode, and considering that the amp is
> correctly tuned, I send a full unmodulated 150 W to the grids.

Not all of the drive W goes to the grids in g-g operation.  Most of it 
is fed through to the anode.
>
>
> Dans un e-mail daté du 10/12/2004 11:04:05 Paris, Madrid, r at somis.org a
> écrit :
>
> The ALC  in your transceiver, not the ALC in the amplifier.
Richard L. Measures, AG6K, 805.386.3734.  www.somis.org