[BULK] - Re: [Amps] Tuning

[Steve Katz]

I re-tune when I see the output fall off by more than 10%.  Or, during
contests, when people stop answering me. -WB2WIK/6

"Nobody needs more than 640k!" -Bill Gates, 1982

> -----Original Message-----
> From:	Bill Turner [SMTP:dezrat1242 at ispwest.com]
> Sent:	Wednesday, December 22, 2004 8:18 AM
> To:	kwasny; amps at contesting.com
> Subject:	[BULK] - Re: [Amps] Tuning
> 
> At 06:56 AM 12/22/2004, kwasny wrote:
> >I have a question that I have never seen the answer to in any amp
> manuals. 
> >After tuning the amp, how far up or down in frequency can you move
> without 
> >retuning the amplifer?
> ___________________________________________________________
> 
> There are lots of variables, especially the antenna, but as a rule of
> thumb 
> on 20 meters, I would retune after QSYing about 100 kHz.  This is 
> proportional to frequency, so on 10 meters, about 200 kHz.  What you will 
> notice is a significant change in plate and/or grid current.
> 
> A very narrowband antenna such as an inductively loaded dipole will
> require 
> the amp to be retuned after a smaller frequency change.
> 
> YMMV, but this should get you started.
> 
> -- 
> Bill, W6WRT
> 
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.296 / Virus Database: 265.6.0 - Release Date: 12/17/2004
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps