[Amps] Henry 2K Classic

[Vic Rosenthal]

Jose R. Corteguera wrote:

>  I order 2 new tubes  and
> install and tune and load in 20 meters  and with 90 W. drive of my FT-920  I
> obtain 1000 watts. Outside anttena.
> 
> I make 3 contacts  in 20 and 15 meters,  work very good,  but the next week
> start and no work, similar problem with the old tubes.

Maybe there is a problem with one of the tube sockets.  Sometimes the filament 
contacts become weakened by heat and do not make good contact.  So you only have 
one tube filament working.  If you can look to see if both tube filaments are 
lit, you can tell if this is the problem.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco