[Amps] SB201 10-meter mod
Gudguyham at aol.com
Gudguyham at aol.com
Wed Feb 11 06:25:44 EST 2004
In a message dated 2/11/04 12:32:55 AM Eastern Standard Time, vic at rakefet.com
writes:
>
> I recently was asked for details about activating the 10m band on an
> SB201. I remember that there were changes to the input network as well
> as the tank circuit. Since I did this in 1979, somehow the details have
> escaped me, and I don't have the amp or the manual any more. Can
> someone help Jacky with this (reply direct to <mailto:ckchu at hotmail.com>).
>
> Thanks
> Vic K2VCO
>
>
It is quite a process to accomplish this "piece meal" You need a new
bandswitch, wafer, and input wafer as well as a 10 meter input coil. Its a lot of
work to do the conversion. The easy way out is to obtain the complete
bandswitch NETWORK from a SB-200 including the input bandswitch wafer and the 10 meter
coil. I sell the complete network (all that you need) for $75.00 plus
shipping. Its mostly a mechanical job with some slight soldering compared to trying
to change out the individual parts (if you can find them). Contact me off
list if you would like to purchase a complete drop in unit. Thanks 73 Louie
More information about the Amps
mailing list