[Amps] Re: Step start...another solution

[R.Measures]

**  In the amplifier I am currently gathering parts for, starting on 120v 
and switching to 240v would exceed the current rating on the mains power 
contactor.   To limit inrush-current at startup, I am using a SPST 100A 
relay with a 24vdc coil, shorting out a 3.5-ohm resistor when the HV 
reacjs c. 2/3 of normal.  The DC coil supply is derived from an 18V-rms, 
1A winding on the HV transformer.  

>I still start my amp on 120 VAC and step it to 240 VAC. No resistors,
>and it's smooth. Just a DPDT relay or even a toggle switch for purists.
>
>73,    Roy    K6XK/0
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>