[Amps] Plate modulator xmfr ?
R.Measures
r at somis.org
Sun Oct 10 13:26:55 EDT 2004
On Oct 10, 2004, at 7:45 AM, Vic Rosenthal wrote:
> StephenTetorka at cs.com wrote:
>> Hi all:
>> I need to better understand the workings of a plate modulator for AM.
>> Considering the RF amp with 2 x 813's and the modulator with 2 x
>> 813's - what are the equations and math to work out the required
>> wattage, impedance, step ratio etc.
>
> What I suggest is that you get a copy of the ARRL handbook from the
> early 50's or late '40's. In addition to the information you seek,
> you'll find lots of stuff about methods of improving the effectiveness
> of the system (clipping & filtering, overmodulation prevention, etc.)
> as well as practical examples of circuits. You might avoid some
> mistakes.
Using the modulation formulas in these publications is a mistake.
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
More information about the Amps
mailing list