[Amps] 5 kw amps -- why?

[R.Measures]

On Oct 20, 2004, at 8:08 AM, Peter Frenning, OZ1PIF wrote:

> Unlike beautiful women you CAN make a both beautiful AND usable Balun 
> yourself - take a 35mm or bigger 4C65 core and a length of RG400 Coax; 
> wind as many windings on the core as will fit (8 will do nicely from 
> 160m to above 10m) and fit the whole thing into a Marine Quality 
> junction box equipped with a PL socket, and three stainless steel 
> eyebolts, and you'll have a pleasing wetherproof 1:1 balun that'll 
> last a lifetime and carry legal limit almost indefinitely...

Peter --  The drawback is only being able to carry 1500W-pep.  Ugly 
baluns can easily do 10db more.
>
> This is what carry my HB W3DZZ into the air.....
>
> Vy 73 de OZ1PIF, Peter
>
> **********  OZ1PIF **************
> email: oz1pif(no-spam-filler)@privat.dk
> http://home24.inet.tele.dk/oz1pif/
> Ph. +45 4619 3239
> Snailmail:
> Peter Frenning
> Ternevej 23
> DK-4130 Viby Sj.
> Denmark
> ***********************************
> ----- Original Message ----- From: "hermans" <on4kj at skynet.be>
> To: "'R.Measures'" <r at somis.org>; "'Barry Kirkwood'" <bjk at ihug.co.nz>
> Cc: "'Rob Atkinson, K5UJ'" <k5uj at hotmail.com>; <amps at contesting.com>
> Sent: Wednesday, October 20, 2004 4:51 PM
> Subject: RE : [Amps] 5 kw amps -- why?
>
>
>
>
> -----Message d'origine-----
> De : amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] 
> De
> la part de R.Measures
> Envoyé : mercredi 20 octobre 2004 16:34
> À : Barry Kirkwood
> Cc : Rob Atkinson, K5UJ; amps at contesting.com
> Objet : Re: [Amps] 5 kw amps -- why?
>
>
> On Oct 19, 2004, at 11:44 AM, Barry Kirkwood wrote:
>
>> Well, I manged to fry a "1500W "  commercially made ferrite balun with
>
>> significantly less than 1500kW out, let alone 3kW plus.
>
> The ferrite used in commercial HF baluns typically has a mfg.'s max
> freq rating of 500KHz to 1MHz.  However, since balun mfg.'s usually
> test their products at <5w, they have no idea that there could be a
> problem.    My disillusionment with ferrite baluns began when I
> discovered that my 7MHz signal had harmonics above 500MHz that were
> strong enough to wipe out UHF line-of sight TV stations.
>
>> Since then have lived in peace with my homebrew coax solenoid baluns.
>
> Amen, Barry.  Beautiful baluns are like unto beautiful women.
> *******************************************
> Bad tongue ON
>
>
> THEY ARE VERY EXPENSIVE AND RUN AWAY VERY QUICKLY.......
>
> Bad tongue OFF
>
> Jos on4kj
> *******************************************
> Richard L. Measures, AG6K, 805.386.3734.  www.somis.org
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>

Richard L. Measures, AG6K, 805.386.3734.  www.somis.org