[Amps] Website

[Will Matney]

Gary,

I have two Harbor Freight outlets pretty close. On is at Crosslanes, WV, and another in Lexington, Ky. The one at Crosslanes is about a 45 minute drive, and Lexington about a 2 to 2-1/2 Hr drive. Another place that's close, and really close to Crosslanes is Blueridge Machine that advertizes a lot in the hobby magazines. I've bought a bunch from them too, and they carry about all the inported machine tools. I'm going to go up there one day and see what the tools look like, You can get burnt by buying them without seeing them. Some Chinese tools have a bad reputation of being too soft and will bend. I just hope when I go they have a wheelchair ramp so I can get inside. Even though by law all new commercial construction supposed to have access, you would be surprised how many don't. If I get to go before long, I'll list anything on here that would be ok to use for amp construction.

Best,

Will


*********** REPLY SEPARATOR ***********

On 8/7/05 at 7:36 AM Gary Smith wrote:
There are two sets of punches. The ones you mentioned and another set that are in a hard plastic case.  Harbor Freight Tools, aka Cheep Chinese Tool Imports, inc.  Around here it referred to as the CCT
Gary

----- Original Message ----- 
From: Will Matney 
To: amps at contesting.com 
Sent: Saturday, August 06, 2005 3:21 PM
Subject: Re: [Amps] Website


Gary,

Yea, I seen those and were the ones I was refering to. They have a little vinyl carrying case with them. Their a pretty nice set and probably as good as others as long as they have been hardened properly. They are an Asian, and probably Chinese import.

Thanks,

Will


*********** REPLY SEPARATOR ***********

On 8/6/05 at 2:46 PM Gary Smith wrote:
Will: this is late and a little off topic, but Harbor freight tools has a set of "Greenlee-like" knock out punches for $29.95.
Thought I'd let you know.
73
Gary...wa6fgi
----- Original Message ----- 
From: Will Matney 
To: amps at contesting.com 
Sent: Saturday, August 06, 2005 1:08 PM
Subject: Re: [Amps] Website


That trdirect URL, I didn't get right. It should be;

http://www.Amateur-Transformer.qHigh.com

Thanks again,

Will


*********** REPLY SEPARATOR  ***********

On 8/6/05 at 4:01 PM Will Matney wrote:

>All,
>
>I am going to move that website on transformers I had off the free site
>and onto my account at verizon. I have a temporary webpage there now and
>need some help to see if everything is ok. The re-direct URL I have tries
>to stick the index page in a frame as an ad but I added some java script
>to it that supposed to break it out as soon as it loads up. If it's
>working, you should not see any ads. Please let me know if it works
>correctly. Then I will start on the new website about transformers/chokes.
>
>Main URL;
>
>http://mysite.verizon.net/craxd1/index.htm
>
>Redirected URL (check for no ad);
>
>Amateur-Transformer.qHigh.com
>
>Thanks to all who help!
>
>Will
>
>
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps