[Amps] Step Start
R.Measures
r at somis.org
Fri Aug 12 17:14:47 EDT 2005
On Aug 12, 2005, at 9:14 AM, gdaught6 at stanford.edu wrote:
> Hi all,
>
> While we're on the subject of soft/step start circuits, I'd like to
> ask a question that I've had for years, but never asked until now:
>
> Why do most step-start circuits in the primary of the HV transformer
> have tow resistors and relay contacts shorting the resistors in EACH
> (i.e. BOTH) leads of the primary?
So that it will work right on either 120v Or 240v mains.
>
> Doesn't a single resistor and relay do the same job? It's a single
> current path.
In a 240v only amplifier, yes.
>
> 73,
>
>
>
>
> George T. Daughters, K6GT
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
More information about the Amps
mailing list