[Amps] Grid Current Advice
Steven Cook
sccook1 at cox.net
Mon Aug 15 23:10:39 EDT 2005
So if you are running AB2 at circa 3,000 volts on the plate, and let's
say... 5 volts of zener bias, and 230 ma of grid current -- would be a
little over 1 watt of grid dissipation. (.230 X 5 = 1.15 watts).
Did I do that right?
Steve
----- Original Message -----
From: "R.Measures" <r at somis.org>
To: <keith at dutson.net>
Cc: "Amps" <amps at contesting.com>
Sent: Monday, August 15, 2005 7:52 PM
Subject: Re: [Amps] Grid Current Advice
There is no max grid-I rating. The max rated grid dissipation is 20w,
but several experimenters have found this to be somewhat conservative
-- probably because the grid is made from Mo, which melts at 2617ºC.
Figuring grid P --- According to "Care and Feeding ... ... ..." ,
grid-dissipation is approx. the indicated DC grid current multiplied by
the RMS grid to cathode potential.
cheers, Keith
.
On Aug 15, 2005, at 7:22 PM, Keith Dutson wrote:
> What is the maximum recommended grid current for a pair of Eimac 3-500G
> tubes? Thanks.
>
> 73, Keith NM5G
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list