[Amps] FC-30 Choke

[Carcia, Francis A HS]

Well My 4-1000A Linear works fine on 160 with a FC30. Pi network input
circuit. gfz 

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Phil Clements
Sent: Friday, December 02, 2005 7:41 PM
To: 'AA6DX - Mark'; amps at contesting.com
Subject: Re: [Amps] FC-30 Choke


The B&W FC series of chokes were all 3-30 mhz continuous coverage.
The ferrite rods were only 3.5 inches long; too short to get the proper
turns of wire on the rod to properly cover 160m. That's why they rated it
3-30 mhz instead of 1.8-30 mhz. 

(((73)))
Phil Clements, K5PC


 
> METHINKS, only thinks, that the "A" version incorporated 15M, which the
> older one without did not ... as there was no 15M band at time it was
> manufactured ...   that right, gang? --- Mark  AA6DX


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps