[Amps] Ohmite thick-film resistor L measurement

[Vic K2VCO]

R.Measures wrote:
> •••   I need to find someone who can measure the L of an Ohmite type TAP 
> 600W, 100Ω thick-film resistor.  This resistor will be used for R-supp 
> in a QRO VHF parasitic suppressor R&D project.  

Unless the reactance is greater than about 650 ohms, you should be able 
to use an MFJ or similar antenna analyzer -- it will tell you R and Z 
(or L).  Am I missing something?

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco