[Amps] super glue?

[John Irwin]

dudes
 
I am in the process of developing a means of notching plastic rod for coil spacing retainers using my shopsmith, cuts a notch in 1/4"rod to half  thickness about 1/8 inch apart.  This will give with #10 wire about 10 turns per inch.  My question is about the glue or coil dope to seal the wire to the rods.  arrl handbook says something about duco cement,I am not familar with duco cement .  At work I use velco cement which is quite like old time airplane model glue.  you can get this at fabric stores.  But what do YOU use for this job. glue should not soften or melt with rf energy and I have no frendly amplifier laying around to roast some samples in to find out!  The glue also should not be conductive for this application.  hot glue is conductive.
 
 
any help will be appriciated
 
john kb9tc

		
---------------------------------
Do you Yahoo!?
 Yahoo! Search presents - Jib Jab's 'Second Term'