[Amps] super glue?

[Dennis12Amplify at aol.com]

In a message dated 2/10/05 6:21:53 PM Central Standard Time,  
crazytvjohn at yahoo.com writes:

I am in  the process of developing a means of notching plastic rod for coil 
spacing  retainers using my shopsmith, cuts a notch in 1/4"rod to half  
thickness  about 1/8 inch apart.  This will give with #10 wire about 10 turns per  
inch.


If the cuts are 1/8 inch apart; wouldn't that give you 8 turns per  inch?
 
I have successfully used superglue to 1KW, but have not tried it with  higher 
power levels.
 
 Dennis O.