[Amps] 813 top cap cement

[GGLL]

	Many thanks for the various answers; I'll give a try to a sealant marketed as 
"Fastix" here, there's a high temperature (350 ºC) resistant version, it's 
like RTV, and what's more important in my opinion is that it's somewhat 
flexible, not rigid at all like epoxi.

Again many thanks
Best regards
Guillermo - LU8EYW.

LKBrownMD at cs.com escribió:
> Guillermo,
> 
> I've used Black OEM Hi-Temp RTV Silicone "Gasket Maker" very 
> successfully in reattaching a plate cap on an 866A.  The brand I used 
> was "Permatex" item #22072, but I'm sure other similar products would 
> work also.
> 
> Lee, KI7UR
> 
> 
> In a message dated 2/17/2005 3:52:01 PM Mountain Standard Time, 
> nagato at arnet.com.ar writes:
> 
>> Which cement could be appropriate to fix the loose top cap in one of my
>> 813's?. It works very well, the cap has been detached from the glass, but
>> still in place by means of the plate connection wire.
>>
>> TIA
>> Best regards
>> Guillermo - LU8EYW.
> 
>