[Amps] Tetrodes in GG Configuration

K7RDX k7rdx at earthlink.net
Wed Jan 19 20:25:43 EST 2005


Right on Colin!....Jim K7RDX
----- Original Message -----
From: "k7fm" <k7fm at teleport.com>
To: <Amps at contesting.com>; "Will Matney" <craxd1 at ezwv.com>
Sent: Wednesday, January 19, 2005 5:23 PM
Subject: Re: [Amps] Tetrodes in GG Configuration


> "What I can,t figure is why one would want to run a tetrode in G-G where a
> triode is the very ticket for it? To me, if one wanted to run a tetrode,
> they would want to run it the way it was designed to run in the first
> place."
>
> There are some very good reasons to run a tetrode in grounded grid.  Using
> the 4Cx1000A as an example, running it grid driven will result in
> unacceptable distortion products.  To get acceptable levels you must
> increase the inverse feedback.  Grounded grid inherently provides feedback
> and will improve the distortion products by about 6 db.  Collins ran the
> 30S-1 with a 4CX-1000A in grounded grid, but also added negative feedback.
> The result is an amplifier significantly cleaner than the tube itself.
>
> A second reason is cost and availability.  A 3-1000 is almost impossible
to
> find.  New, they are probably $750.  However, a 4-1000 run grounded grid
is
> available used for about $100.  The only penalty is a requirment of 1,000
> volts additional plate voltage.  But, the proper ham can build a power
> supply with an additional 1,000 volts for less than the $650 price
> difference.
>
> Not many years ago, I bought a used amp with a 3-1000 final.  I then sold
> the tube for more than I paid for the amp and plugged in a 4-1000.
>
> 73,  Colin  K7FM
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.783 / Virus Database: 529 - Release Date: 10/25/04
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps



More information about the Amps mailing list