[Amps] B&W 852 - best tubes

[rk]

dave Thomas wrote:
>  I have a B&W 852 switched inductor. I have seen it used with the 4CX1000A
> but wondered if it might be OK for a GU84 or a pair of 4CX800As.  Any
> comments would be appreciated. 
>  
> Thanks,
>  
> Dave W4DIM 
>  
> ex N4CLR
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
> 
Do the math-backwards.... Check the L, then figure what plate Z needs that value.
The 852's are for low ratio Plate Volts/Current as 4X1000's.
Never looked at an 852, but the 850's don't follow with the same plate Z per band.
One of Bill Orr's books talks about it and says move the taps.


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/05